Fish Meal PlantTechnical Flow：
After raw fish materials pre-crushed, the raw materials through the screw conveyor into steam dryers. after primary and secondary drying, the material delivered to cooling vibrating screen filter. At last, smash particles and package Into bags.
The deodorant deodorization system, the cooling water through the suction pump to the top of deodorant tower ,and cooling water and exhaust heat exposure, absorption, condensation, condensed water from the drains at the bottom of the deodorant tower into the sedimentation tanks; small part of the residual gas which is not enough time to absorb accompanying steam into the induced draft fan into the Air intake, in the role of the centrifugal force, was sent through pipe to outside

1、Feather dehydration
Based on screw expressing principle, to dehydrate wet materials which is high humidity, to remove water in materials, which ready hydrolysis. The humidity of raw materials is about 75%, after squeezing, the humidity is about 40%.Equipment is reasonable in structure, high rates of dehydration, low energy consumption, easy maintenance, lower cost in feed production processing, significantly improving efficiency .

*2 .Belt conveyor
Our Belt conveyor have many strong points, such as large amount of transmission, simple structure, easy maintenance, standardized components, etc., it is widely used in transportation loose material or items, according to the technology, can work separately, can also work in sets or with other equipments to form a conveying system to meet the needs of different type of line operations. The conveyor can work with ambient temperature -20 ℃ to +40 ℃and distribution of materials in the temperature below 50 ℃. We provide users with the project design, process design, standard and non-standard product design and production.

3、Screw conveyor
GX style screw conveyor can be divided into seven model which with the different diameter 150、200、250、300、400、500、600mm，length3-70m，can work in ambient temperature -20~50℃，transport materials in temperature lower than 200 ℃ and less than 20 ° angle in one direction.
Principle: By the use of motor reducer drive screw rotation, the materials transported to the target location.

*4、Feather dydrolyzing machine
Take feather as a example, the wet poultry feather which from slaughterhouse is transported to the dydrolyzing machine with the conveyor. After 30 minutes dyrolyzing in the normal temperature, then convor it and sealed to make the temperature reach to 130℃, to kill E. coli and break
Keratin molecule chain, to improve digestibility of 75%. Keep the pressure reached 0.25mpa and make it at pressure for
45min, then exhaust steam water in tank, cooling the powder which is brown in color, protein-containing
80%. Apply to feather from slaughterhouse, fur animal’s bones, offal, and intestines’ casings and others, the disabled dead poultry, animals, animal carcasses in transportation, all can be make into feather meal, meat bone meal, chicken meal, intestinal feather powder with high temperature sterilization.

*5、Dryer
This machine transfer heat through the wall to heat materials, some of the steam into the shell and tube in the wall between the annular space through the wall heating materials, condensed water from the exhaust port at the bottom of the trap; Another part of the steam into the main shaft and coil and heating coil, condensed water discharge from the mouth of rotating joint. With the spin axis and the round of the leaf and coil, the materials is fully mixed and stirred. The second time steam discharge through the wind pipe. The pipes are weak to maintain the vacuum, so do not waste steam leak, but also avoid receive too much cold air. The feed plate is allocated in heating coil, which can promoted With the forward movement of materials as well as self-cleaning effect, be able to clear the shaft and cylinder wall coating in order to maintain good heat transfer capacity

Crusher